Please follow the below steps to do that.

Step 1: Login with the correct User Name and the password.

Step 2:  Now click on the “Subscription” on the Left Panel.

Step 3: Now select the subscription on [...]]]> In this tutorial you will learn about changing the particular subscriptions hosting setting in the Plesk 10.

Please follow the below steps to do that.

Step 1: Login with the correct User Name and the password.

Step 2:  Now click on the “Subscription” on the Left Panel.

Step 3: Now select the subscription on the right hand side which you want to change hosting setting.

Step 4: Click on the “Change Hosting Setting”

Step 5: Change the information which you want to change.

Step 6: Now update the information and then click OK.

This is how you can change the hosting setting in the Plesk 10.

Follow below tutorial to do that.

Step 1: Login with the correct user name and the password in the Plesk 10.

Step 2: Go to the Websites & Domains tab > DNS [...]]]> In this tutorial you will learn about making the Panel’s DNS server act as a primary for a zone in the Plesk 10.

Follow below tutorial to do that.

Step 1: Login with the correct user name and the password in the Plesk 10.

Step 2: Go to the Websites & Domains tab > DNS Settings.

Step 3: If you have several domain names, select the domain name whose DNS settings you want to manage.

Step 4: Click Switch DNS Service Mode.

The original resource records for the zone will be restored.

If you have external primary and secondary name servers that are authoritative for some of your websites, switch off the Panel’s DNS service for each of these sites.

This is how you can make the Panel’s DNS Server act as primary for a zone in the Plesk 10.

Please follow below Guidelines.

Step 1: Login in two panel with correct user name and the password.

Step 2: Now click on the “WebSites & Domain” Tab.

Step 3: Now click on the “FTP access”.

Follow the below guideline to achieve this.

Step 1: Login with the correct user name and the password.

Step 2: Click on the “Website & Domains” tab.

Step 3: Click on the “DNS Setting”.

Step 1: Login with the correct user name and the password.

Step 2: Go the customer’s tab.

Step 3: Click on the check box of which customer you want to remove.

Step 4: Now click on [...]]]> In this tutorial you will learn about removing customer account. Please follow the below tutorial to do the same.

Step 1: Login with the correct user name and the password.

Step 2: Go the customer’s tab.

Step 3: Click on the check box of which customer you want to remove.

Step 4: Now click on the “Yes” for the confirmation.

And now your customer has been removed from the plesk 10.

This is how you can delete the customers from the Plesk 10.

Please follow the below tutorial to do the same.

Step 1: Login with the correct user name and the password.

Step 2: Go the “Customer” Tab at the left of the panel.

Now the customer list will be displaying the [...]]]> In this tutorial you will learn about activating the several customer account after suspending.

Please follow the below tutorial to do the same.

Step 1: Login with the correct user name and the password.

Step 2: Go the “Customer” Tab at the left of the panel.

Now the customer list will be displaying the right hand side of the panel.

Step 3: Now check all the customer’s you want to activate at once.

Step 4: Now click on the “Activate” Tab

Wait for few second, after that you will see the notification that the customer account has been activated.

This is how you can activate the several customers in the Plesk 10.

Please follow the bellow steps.

Step 1: Login to the panel with correct user name and the password and then go the Websites and domains then DNS Settings.

Step 2: If you have several domain names, select [...]]]> In this tutorial you will learn about making Panel’s DNS Server act as a secondary name server.

Please follow the bellow steps.

Step 1: Login to the panel with correct user name and the password and then go the Websites and domains then DNS Settings.

Step 2: If you have several domain names, select the domain name whose DNS settings you want to manage.

Step 3: Click Switch DNS Service Mode.

Step 4: Click Add Record.

Step 5: Specify the IP address of the primary (master) DNS server.

Step 6: Click OK, and then click Update.

This is how you can do that.

Step 1: Login with the correct user name and the password.

Step 2: Click on the “Websites & Domains” tab

Step 3: Now click on the DNS Settings.

Step 4: Select the domain name whose DNS settings you want [...]]]> In this tutorial you will learn about restoring the original DNS records on the server.

Step 1: Login with the correct user name and the password.

Step 2: Click on the “Websites & Domains” tab

Step 3: Now click on the DNS Settings.

Step 4: Select the domain name whose DNS settings you want to manage.

Step 5: Click Restore Defaults.

Step 6:  In the IP address menu, select the IP address to be used for restoring the zone.

Step 7: Specify whether a www alias is required for the domain.

Step 8: Select the Confirm the restoration of the DNS zone checkbox, and click OK.

This is how you can restore the Original DNS zone in the Plesk 10.

Step 1: Login with the correct user name and the password.

Step 2: Go to the “Customer” in the left hand menu.

Step 3: Now select the “Customer” which [...]]]> In this tutorial you will learn about activating the customer account after suspending. Please follow the below instructions to activate the customer in the Plesk 10.

Step 1: Login with the correct user name and the password.

Step 2: Go to the “Customer” in the left hand menu.

Step 3: Now select the “Customer” which you want to activate.

Step 4: Now click on the “Activate” tab.

Now you will see the notification that customer has been “Activated”.

This is how you can activate the customer in Plesk 10.

Step 1: Login with the correct user name and the password.

Step 2: Go to the Websites & Domains tab > DNS Settings.

Step 3: Click on the domain name whose DNS settings you want [...]]]> In this tutorial you will learn about the removing a resource record from the DNS zone in the Plesk 10.

Step 1: Login with the correct user name and the password.

Step 2: Go to the Websites & Domains tab > DNS Settings.

Step 3: Click on the domain name whose DNS settings you want to manage.

Step 4: Select a checkbox corresponding to the record you want to remove.

Step 5: Click Remove.

Step 6: Confirm removal

Step 7: click OK

Step 8: Now you have to click on the update button.

Step 1: Login with the correct user name and the password in to the panel.

Step 2: Go to the Websites & Domains tab > DNS Settings.

Step 3: If you have several domain [...]]]> In this tutorial you will learn about change the Naming format of SOA Records. Please follow the below tutorial to learn.

Step 1: Login with the correct user name and the password in to the panel.

Step 2: Go to the Websites & Domains tab > DNS Settings.

Step 3: If you have several domain names, select the domain name whose DNS settings you want to manage.

Step 4: Click SOA Record.

Step 5: Select the Use serial number format recommended by IETF and RIPE checkbox.

Note: See the sample of SOA serial number generated with the selected format. If the resulting number is less than the current zone number, the modification may cause temporary malfunction of DNS for this domain. Zone updates may be invisible to the Internet users for some time.

Step 6: Click OK, and then click Update.

This is how you can change the format of SOA records in the Plesk 10.

Step 1: Login with the correct user name and the password in the Panel.

Step 2: Now click on the “Customer Tab”

Step 3: It is optional you filter out the “Active Accounts”

3. If you have several domain names, select the domain name whose DNS [...]]]> In this tutorial you will learn about modifying the SOA Entries for a domain in the Plesk 10.

1. 1.       Login with the correct user name and password in the panel.
2. 2.      Now click on the Websites & Domains tab > DNS Settings.

3. If you have several domain names, select the domain name whose DNS settings you want to manage.

4. Click SOA Record.

5. Specify the required values:

• Refresh interval. This is how often the secondary name servers check with the primary name server to see if any changes have been made to the domain’s zone file. The Panel sets the default value of three hours.
• Retry interval. This is the time a secondary server waits before retrying a failed zone transfer. This time is typically less than the refresh interval. The Panel sets the default value of one hour.
• Expire interval. This is the time before a secondary server stops responding to queries, after a lapsed refresh interval where the zone was not refreshed or updated. The Panel sets the default value of one week.
• Minimum TTL. This is the time a secondary server should cache a negative response. The Panel sets the default value of three hours.
• Default TTL. This is the amount of time that other DNS servers should store the record in a cache. The Panel sets the default value of one day.

6. Click OK, and then click Update.

Usage of serial number format recommended by IETF and RIPE is mandatory for many domains registered in some high-level DNS zones, mostly European ones. If your domain is registered in one of these zones and your registrar refuses your SOA serial number, using serial number format recommended by IETF and RIPE should resolve this issue. The Panel-managed servers use UNIX timestamp syntax for configuring DNS zones. UNIX timestamp is the number of seconds since January 1, 1970 (Unix Epoch). The 32-bit timestamp will overflow by July 8, 2038.

RIPE recommends using YYYYMMDDNN format, where YYYY is year (four digits), MM is month (two digits), DD is day of month (two digits) and NN is version per day (two digits).

The YYYYMMDDNN format will not overflow until the year 4294.

This is how you can edit the SOA Records in the Plesk 10.

Please follow the below tutorial, to understand this process.

Step 1: Login with the correct user name and the password.

Step 2: Now go on the “Customer” Tab.

Now you have all the list of your customers.

Step 1: Login to your reseller panel with correct user name and the password.

Step 2: After Login go to the Websites & Domains tab

Step 3: Then click on the “ DNS Settings.”

Step [...]]]> Please follow the below tutorial to change or modify the properties of a DNS resource record in Plesk 10.

Step 1: Login to your reseller panel with correct user name and the password.

Step 2: After Login go to the Websites & Domains tab

Step 3: Then click on the “ DNS Settings.”

Step 4: If you have more domain name hosted in the same panel, then select the domain name whose DNS settings you want to manage, modify or change.

Step 5: Now you have to click the hyperlink in the Host column corresponding to the resource record you want to modify.

Step 6: Now modify the record as required.

Step 7: Now click OK, and then click Update.

In addition to the resource records described above, there is also a Start of Authority record.

This record indicates that this DNS name server is responsible for the domain’s DNS zone. It also contains settings that affect propagation of information about the DNS zone in the Domain Name System.

This is how you can alter, change, modify the DNS record in the Plesk 10 Panel.

 Step 1: Login with the correct user name and password.

Step 2: Now go to “Customers” account.

Step 3: Now click on the customer name which you [...]]]> Please follow below instruction to reset the user name and password of a user to access the control panel in Plesk 10.

 Step 1: Login with the correct user name and password.

Step 2: Now go to “Customers” account.

Step 3: Now click on the customer name which you want to change the user name and the password.

Step 4: Now click on the “Change Login Info”

Now fill the new user name and the password.

Step 5: Now click on the OK.

This is how you can change the password and the user name of a customer uses to access control panel in the Plesk 10.

2. Go to the Websites & Domains tab > DNS Settings.

3. Click Add Record.

4. Select a resource record type, and specify the appropriate data:

Step 1: Login with the correct user name and the password.

Step 2: Now go to customers.

Step 3: Now click on the customer’s name which you want to edit.

Step 4: Click on the “Edit Contact Info”
Now change [...]]]> Please follow below instruction to change the customer contact information in Plesk 10.

Step 1: Login with the correct user name and the password.

Step 2: Now go to customers.

Step 3: Now click on the customer’s name which you want to edit.

Step 4: Click on the “Edit Contact Info”
Now change the information as you wish.

Step 5: Now click on the OK.

Now yours customer information is changed.

This is how you can change the customer information in Plesk 10.

If you are using Microsoft FrontPage for collaborating on website content with other users, then you need to create additional Microsoft FrontPage accounts.

To create an additional Microsoft FrontPage account:

1. Login to your control panel with correct user name and password.

Step 1: Login with the correct user name and the password to get in to the panel.

Step 2: Go to “Customer”

Step 3: Now click on the “Customer Name”.

Step 4: Now click on the “Add New Subscription”

Please follow the below steps.

1. Open your FrontPage program.

2. Open a FrontPage website: open File menu and select the Open Site item.

3. Go to Remote Web site view: click the Web Site tab, and [...]]]> In this tutorial we will learn about publishing the websites through Microsoft Front Page through FTP.

Please follow the below steps.

1. Open your FrontPage program.

2. Open a FrontPage website: open File menu and select the Open Site item.

3. Go to Remote Web site view: click the Web Site tab, and then the Remote Web Site

button at the bottom of the window.

4. Set up your Remote Web Site Properties:

Click the Remote Web Site Properties button in the upper-right corner of the window.

Select FTP as the remote Web server.

In the Remote Web site location box, type your host name (for example, ftp://ftp.yourdomain.

com)

In the FTP directory box, type your FTP directory if your hosting company provided one.

Leave it blank if they did not specify one.

Select the Use Passive FTP check box if your computer or network is protected by a

firewall.

5. Click OK to connect to the remote site.

The Remote Web site view will show files that you have in your local and remote sites.

6. Click the Publish Web site button in the lower-right corner of the window.

This is how you can publish the websites through FTP.

Follow below steps.

Note: You can switch several [...]]]> In this tutorial we will learn about to switch a subscription to another service plan in Plesk 10.

Follow below steps.

1. Login to your control panel with correct user name and password.
2. Go to Subscriptions > <Subscription Name>.
3. Click Change Plan.
4. Select new service plan.
5. Click OK.

Note: You can switch several subscriptions at once: Go to Subscriptions, select target subscriptions in the list and click Change Plan.

This is how you can switch the subscription to another service plan.

Step 1: Login with your correct user name and the password to the panel.

Step 2: Now go to the “subscription”.

Step 3: Now click on the “change plan”

Step 4: Now select the required add-ons plan in the box titled [...]]]> In below tutorial you will learn about the extending subscription by add-on plan.

Step 1: Login with your correct user name and the password to the panel.

Step 2: Now go to the “subscription”.

Step 3: Now click on the “change plan”

Step 4: Now select the required add-ons plan in the box titled “Available” .

Now click ok.

This is how you can extend the subscription by add-on plan in Plesk 10.